Our Heat Transfer Vinyl (HTV) Glitter is a heat applied product designed to add sparkle and shine to any garment. This material is thicker than most of our other HTV films, so increase the downward pressure of your knife blade to 200 grams (minimum) to ensure clean cuts and easy weeding. Recommended for use with the following fabrics: Acrylics, 100% Cotton, Polyester Knits, Polyester Mesh, 100% Polyester and Poly-Cotton blends. NOTE: Not for use on Nylon or "Dazzle Cloth." You can use HTV Glitter for tear-away applique by removing the carrier sheet and hooping with the garment. Simply sew out the placement stitch, tear away the excess material, and run your finishing stitch!
Preheat your garment for 5 seconds. Place the HTV Glitter design on the garment, then place a cover sheet over the transfer.
- Time: 15 seconds
- Temperature: 330°F
- Pressure: Light to Medium
- Peel: Cold
HINT: Run a lint roller over the transfer area (on the garment) to remove any loose threads or stray fibers. Preheat your garment for 5 seconds. Place the transfer onto the garment, then place a cover sheet over the design. Time, temperature and pressure may vary if using an iron instead of a heat press machine.